Current Jobs

Role & responsibilities

• Design Ownership - Lead the complete hardware design process, including architecture definition, circuit design, schematic capture, and PCB layout for high-speed digital and mixed-signal boards.
• High-Speed Design - Perform schematic and board-level design for high-speed protocols such as PCIe Gen4/Gen5, DDR4/DDR5, USB 4.0, and MIPI.
• Simulation & Analysis - Perform Signal Integrity (SI), Power Integrity (PI), and thermal analysis to ensure design reliability.
• Lab Validation - Lead board bring-up, troubleshooting, and debugging using advanced lab equipment (oscilloscopes, spectrum analyzers, logic analyzers).
• Cross-functional Collaboration - Work closely with Firmware, Software, FPGA, and QA teams to ensure successful system integration and EMI/EMC compliance.
• Documentation - Prepare detailed design specifications, Bill of Materials (BOM), and validation reports.

Basic Qualifications:

• Bachelors or Masters degree in Electrical/Electronics/Communication Engineering or related field from a reputed institute.
• 6–10 years of progressive experience in board-level design within the semiconductor industry.
• Proficiency in high-density/high-speed design including FPGAs, SerDes, PCIe Gen4/Gen5, UFS 4.0, 10/100 GigE, C-PHY/D-PHY, and USB 3.2.
• Experience interfacing high-speed memories such as DDR4/DDR5, RDIMM, and SODIMM modules.
• Strong experience in system integration, schematic design, and PCB layout using industry-standard tools such as SPICE, Altium, or Cadence.
• Hands-on experience in hardware validation, board bring-up, and troubleshooting using advanced laboratory equipment.
• Experience in Signal Integrity (SI) and Power Integrity (PI) analysis, including high-speed analog simulations using tools such as HFSS, SIwave, ADS, and HyperLynx.
• Hands-on experience with 33GHz and 50GHz oscilloscopes and GHz pattern generators for protocol capture, timing, and eye diagram analysis.
• Strong collaboration skills to work with RTL, Software, and Quality teams for system-level debugging and integration.
• Good verbal and written communication skills with the ability to prepare documentation as per organizational standards.

Soft Skills:

• Strong leadership, mentoring, and project management capabilities.
• Excellent written and verbal communication skills for technical documentation and presentations.

Role Overview

We are seeking a mid-level Program Manager to drive the execution of electronic test equipment development programs. This role will coordinate cross-functional engineering teams across hardware, FPGA, embedded firmware, application software, UI development, conformance, and system testing. The focus is on structured execution, milestone management, quality discipline, and alignment with customer commitments.

Key Responsibilities

• Drive coordination between hardware, firmware, FPGA, application software, UI, and validation teams.
• Develop and maintain detailed program schedules and engineering milestones.
• Ensure adherence to a structured gated product development process.
• Track dependencies, risks, and issue resolution across engineering streams.
• Monitor quality metrics, defect tracking, and test coverage to ensure product robustness.
• Coordinate customer requirements, feature tracking, and release commitments.
• Provide clear program visibility through dashboards and structured reporting.

Required Qualifications

• Bachelors or Masters degree in Electronics and Communication
• 6–10 years of program management experience in electronics product development including hardware and software.
• Knowledge of structured gated product development processes.
• Understanding of quality processes, defect tracking, and validation cycles.
• Strong planning, risk management, and stakeholder communication skills.
• Strong inter personal communication skills.

Preferred

Educational Qualification

• B.E. in Electronics and Communication or Computer Science

Experience

• 3 to 5 years of experience in Software Development and Engineering Activities
• Strong background in Object-Oriented Programming; preference for experience in desktop application development
• Proficient in C#.NET, WPF, Windows application development, and design patterns
• Experience with Agile software development methodologies
• Knowledge of advanced C# concepts such as Multi-Threading, LINQ, Generics, and practical implementation
• Experience in C++/VC++ and Angular design and development is a plus
• Familiarity with serial bus protocols such as I2C and SPI is preferred

Company Description

Prodigy Technovations offers industry-leading advanced protocol validation solutions for testing and validating emerging and mainstream serial bus technologies in new-generation System-on-Chip (SoC) designs. With over a decade of experience, we drive innovation by actively contributing to industry standards. We provide a comprehensive suite of high speed and low-speed Protocol Exerciser and Analysis capabilities, ensuring our clients maintain a competitive edge in the ever-evolving semiconductor landscape. Some of the Prodigy Technovations products address protocol validation needs for PCIe, UFS, I3C, SPMI, RFFE, eMMC, SD Express, SD, MDIO, QSPI, automotive, Intel 16th generation core interface STEPg1 and many more. Visit below pages to learn more about our organization

https://dev-prodigy.greatsolutionsatwork.com/products

https://dev-prodigy.greatsolutionsatwork.com/protocols/prodigy-technovations-introduces-powerful-pcie-gen5-protocol-analyzer

https://evision-systems.com/company/press-news/worlds-first-tested-ufs4-0-m-physm-unipro-and-ufs4-0-protocol-analyzer/https://www.prodigytechno.com/awards

Role Description

As a Senior/Lead Hardware Engineer you will be designing innovative and high performance next generation Protocol Analyser products for the semiconductor industry. We are looking for candidates who thrive in a fast paced start-up like environment, you will be engaged In all aspects of hardware design life cycle including high-speed board design, R&D, proof of concept designs and validation.

Qualifications

• Bachelor's or master’s degree in Electrical/Electronics/Communication Engineering or related field from reputed institute.
• 4 to 8 years of board design experience from any product based organization.
• Proficient in high-density/high-speed design (including FPGA's, SerDes, PCIe Gen4/Gen5,UFS 4.0, 10/100 GigE, CPHY/DPHY,USB 3.2).
• Experience in interfacing high-speed memories such as DDR4/5, RDIMM, SODIMM Modules
• System integration, including schematic and layout using industry-standard capture and design packages such as spice, Altium, or Cadence.
• Hardware validation, troubleshooting, board bring-up, candidate should be good at using high-end laboratory equipment.
• An outstanding teammate with strong interpersonal and communication skills. Collaborate with RTL, SW, and quality engineers to integrate and debug the system-level issues.
• Good verbal and written communication skills, design documentation as per organizational standards.

Preferred Qualifications

• Experience in signal integrity and power integrity, High-speed board design concepts.
• Hands-on Signal integrity analysis, PI and high speed analog simulation, SI tools such as HFSS, SIwave, ADS and Hyperlynx.
• Hands on with 33GHz and 50GHz Oscilloscope’s and GHz pattern generators for protocol capture, timing and eye diagram analysis.

Inclusion and Diversity

• We are committed to fostering a workplace that celebrates diversity in all its forms and believe diverse teams drive innovation, creativity, and success.
• We aim to create an inclusive environment where all employees feel valued and respected.

Job Summary

We seek a hands-on Technical Lead FPGA Lead with 7-10 years of experience to architect and deliver high-speed FPGA designs. You'll lead a small team, drive micro-level architecture for performance-critical systems and ensure seamless integration of protocols like PCIe, MIPI, and 10G Ethernet. If you thrive on lab debugging and optimizing complex designs, this is your role.

Key Responsibilities

• Define and document micro-level architectures for high-speed data paths, ensuring optimal resource utilization and low latency performance.
• Lead end-to-end FPGA design cycles, from RTL development to implementation and verification on Xilinx (Kintex/Versal) and Altera platforms.
• Execute rigorous Static Timing Analysis (STA) and resolve complex constraints. Analyze and mitigate Clock
• Domain Crossing (CDC) issues to ensure design robustness.
• Implement and validate protocols like PCIe, MIPI, DDR, USB and 10G Ethernet using RTL (Verilog/VHDL). design debugging with lab equipment like oscilloscopes, logic analyzers, ILA, and SignalTap.
• Mentor junior engineers, conduct code reviews, and collaborate with cross-functional teams (Hardware and software)

Required Qualifications

• Bachelor's/Master's in Electrical Engineering, Computer Engineering, or related field.
• 7-10 years of hands-on experience with diverse FPGAs (Xilinx and Altera/Intel).
• Expert in RTL design, STA, and CDC; proven track record in high-speed design (>10Gbps).
• Deep experience with PCIe, MIPI protocols, and 10G Ethernet (At Least with one protocol).
• Proficiency using lab tools: oscilloscopes, logic analyzers, ILA/SignalTap.
• Strong leadership skills with experience managing small teams in agile environments.
• Familiarity with Vivado, Quartus, and scripting (TCL/Python) is a plus.
• Familiarity with Gigabit transceiver with NRZ and PAM4 is a plus
• Willingness to learn new architectures and protocols as technology evolves.

Role & responsibilities

We are seeking an experienced and versatile Technical Content Writer who can create clear, engaging, and user-focused content across product documentation, blogs, digital platforms, and video formats. This role goes beyond traditional documentation and requires the ability to translate complex technical concepts into compelling content for customers, partners, and internal teams. The ideal candidate will work closely with Product, Engineering, Sales, and Marketing to create high-quality technical and marketing content that drives product understanding and adoption. The candidate should also be comfortable appearing on camera for product walkthroughs, explainer videos, and digital content when required.

Key Responsibilities

• Create and maintain high-quality documentation including
• User guides
• Technical manuals
• Release notes
• Installation/configuration guides
• Knowledge base articles
• Ensure documentation aligns with product releases and updates
• Review and improve existing documentation for clarity, accuracy, and usability
• Follow structured documentation standards and best practices

• Write blogs, articles, and thought-leadership content related to products, technology, and industry use cases
• Develop website content including product pages, solution pages, and technical explainers
• Create case studies, application notes, and customer-facing content
• Support sales enablement content such as presentations and product explainers

Write scripts for -

• Product explainer videos
• Demo videos
• Educational/technical videos

Be comfortable appearing on camera for -

• Product walkthroughs
• Knowledge-sharing videos
• Marketing and social media content
• Collaborate with marketing/design teams for video and visual content creation

• Work closely with Product Managers, Engineering, QA, Sales, and Marketing to gather inputs and understand product features.
• Participate in product discussions to stay aligned with updates and roadmap.
• Convert technical inputs into customer-friendly content for multiple audiences.

• Ensure consistency in tone, structure, and terminology across all content.
• Manage multiple content and documentation projects simultaneously.
• Maintain content repositories and ensure version control.
• Continuously improve content based on feedback from customers and internal teams.

Qualifications & Skills

• Bachelor's degree in Electronics, Engineering, Technology, Communications, or a related field
• 3+ years of experience in technical writing/content creation in a technology or product-based company
• Experience in engineering-driven products is a plus

• Excellent writing, editing, and storytelling skills.
• Strong ability to simplify complex technical concepts.
• Experience writing both documentation and marketing-oriented technical content.
• Ability to work independently and manage multiple deadlines.
• Strong collaboration skills across technical and non-technical teams.

• Experience with documentation tools (MS Word, FrameMaker, or similar)
• Familiarity with CMS platforms, blogs, and LinkedIn content is a plus
• Basic understanding of video scripting and content creation
• Comfortable speaking on camera for professional content when required

• A structured and detail-oriented technical writer who can also think like a content creator
• Someone who can bridge engineering, product, and marketing through content
• Confident communicator who is comfortable presenting and appearing in videos
• Proactive, curious, and willing to learn new technologies quickly

Role & responsibilities

• Senior FPGA Design Engineer will be working on our existing and next generation Protocol Analysers and similar products.
• Opportunity to develop a new product to top 10 semiconductor companies to test their next generation products
• The role involves contributing to the entire FPGA based product development flow starting from requirement analysis till final product testing in lab environment.
• The candidate will be responsible for architecture/micro-architecture design and implementation of the logic in Verilog for targeted FPGA, writing test benches to validate the design etc.
• Job involves frequent interaction with board design, software, testing and lab teams to deliver the product meeting the customer requirements.
• Job involves understanding and working with interfaces such as PCIe, GigE, MPHY/UFS, DPHY/CSI/DSI, USB, SD, eMMC, I3C/I2C, SPI/QSPI etc.
• Contributing to/participating in internal design reviews to ensure adherence to the company FPGA design process.

Qualifications

• BE/ME in Electronics from a reputed college. Specialization in VLSI and Embedded Design is a plus.
• 3 to 8 years of experience in designing and implementing FPGA based solution in Xilinx or Altera FPGA, preferably FPGA based product development experience.
• Must have experience in System Design with Xilinx/Altera FPGA devices with relevant tools.
• Must have experience in Verilog and/or VHDL coding.
• Must have experience in synthesis and implementation (floor planning and placement and routing) using FPGA tools.
• Must have experience in using constraints to achieve timing requirement.
• Experience in working on high speed FPGA designs is a major plus.
• Thorough knowledge of Static Timing Analysis (STA) is an added advantage.
• Must have experience in building test bench for verification.
• Must have experience in board level testing and system debugging.
• Must have knowledge in any of the protocols like UFS, UniPro, USB, Ethernet, PCIe, I3C, I2C, SPI, QSPI, UART, JTAG, SPMI, RFFE, SD, eMMC etc.
• Must have hands on experience with FPGA debugging tools and test & measurement instruments such as oscilloscope and Logic Analyzer.
• Should have strong problem solving and debugging skills.